Direct restoration of hard dental tissues is one of the most common methods in dentistry. Usually, restorations are achieved by hand free technique and a major problem relates to the management of the anatomical form, size, individual relief and shadows among others. Inadequate due consideration of these aspects can result in deformation of restorations. Coltene/ Whaledent offer solutions to these potential problems.

COMPONEERS are polymerized, prefabricated composite enamel shells in different sizes that combine the advantages of direct composite restoration with the advantages of laboratory fabricated veneers. The prefabricated componeers, that can be individualized, leads into better marginal adaptation and reaches a 100% connection to the restoration composite. They are completely homogeneous and free of voids with a thickness of onlay 0.3mm. The anatomical basic form consists of different sizes and colors which makes the work easier. The correction of unlikely teeth, malpositions and less smile presence seems to be more and more important for both the patient and the dentist. Also the cost – benefit relationship is a criteria, natural beauty, minimal invasive procedure, ability of individualization, repair possibility and technical and dental feasibility.

Advantages of COMPONEER:

COMPONEER is a cost-effective treatment for the patient with a high success rate and efficiency

Quality dental restoration for high surface and edge quality with excellent aesthetic results

Minimally invasive removal of healthy tooth substance

No impressions or laboratory necessary – attractive teeth after only one session

Best options for customization (shade selection, accentuation of shape and structure

In case of partial and total prosthetic, we use often the structures that are installed on the implants. These structures can be installed on the implants, which were introduced at other workplaces. When making these works we use the CEREC system and Ti-base from the German manufacturer Sirona.

Scanning is done in the patient's mouth with an intraoral camera Omnicam. Abutments or screwed crowns are modeled in a special appliance in the dental office or dental laboratory. Milling process is done at our clinic in cooperation with the dentist and dental technician. In the case we use materials from zirconia oxide we can fix completed work after scanning of crowns and bridges on the same day or at latest the following day. CEREC system can make a crown to previously made implants from manufacturers such as.: Nobel Biocare, Active Nobel, Straumann, Astra Tech, Friadent Frialit, Biomet 3i, conical implants brand Zimmer, Medentika M-implant.

We can make zirconia bridges on implants in the posterior area in full anatomical shape, as well as bridges in the anterior region using ceramic coating, which requires spending a little more time at our clinic.

We can make complex prosthetic work on their own teeth or on implants, thereby altering the shape or color of teeth according to the wishes of our client.

Not for nothing is called radiant teeth "Hollywood smile", this word is associated with famous movie stars on the red carpet in Hollywood.

The secret of this smile is the conventional so-called "direct" smile. This means that the front four teeth are aligned relative to each other in a line. Furthermore, this characteristic smile is also associated with dominant size of teeth and their bright white color.

However, each nation has its own standard of beauty, which is determined by various factors, including physiological properties.

How to create a Hollywood smile?

An important role has gender, social status of the patient, and also the type of smile - open or closed. Important is if the treatment is limited to the teeth or there is need to adjust the soft tissue. If we should stick to the principles resulting from anthropology, a woman's teeth should be with rounded edges and men should have pronounced teeth with sharp edges. If a patient puts emphasis on professional development, we can slightly increase the canines - the research shows that the higher canines are, the more confident look man has. Girls who want to look slim, we recommend to slightly extend the two front teeth - men equate long incisors with slender legs.

Another essential factor is the colour of your smile. We have special color swatches from which the patient may choose at its discretion. Porcelain venners can achieve maximum effect and create a smile of real celebrities. Using the aesthetic veneers allow us to alter the color of teeth, adjust the shape or location. Ceramics is known for the aesthetic and material properties for the revival of the former beauty of the natural tooth enamel. The material has all the properties similar to natural enamel tissues.

Ceramic veneers are one of the best aesthetic solution. Ceramic material scatter the light and because of that, it has a very natural look. The composition, to which the ceramic veneers are fixed, ensures reliable and long-term fixing of the veneer to the tooth surface. This preceding factor enables the minimal grinding teeth. Using this technique maximizes the preservation of natural fibers. On the other hand, the relatively high price of this technology as the aesthetic solution for your teeth is the main reason why this kind of restoration is not for everyone.

Quality and sophisticated technologies require a long and complicated process. Not only experienced and qualified dentist, but also manually by a skilled dental technician.

The dental technician needs to know not only medical terminology but also he must have a good understanding of the pathological changes of the teeth and mouth and have the aesthetic sensibilities. Even such a seemingly technical work requires creativity. Good dental technician must abound qualities like patience and above all punctuality and responsibility. Any slight inaccuracy may bring a lot of inconvenience to the patient. The dental technician is similar to jeweler who works daily with many small details. Artificial teeth should look as close as possible to natural teeth. Doctor and technician are cooperating in the creation of aesthetic veneers and crowns for the confident and attractive smile.

It is good to know that "Hollywood Smile" wasn’t born in the studio, but at the dental clinic. If you for some reason don’t like the shape, size and hue of your teeth, our dental technician "brings to life" your dream of a perfect smile.

Effective system for tooth whitening! Confirmed by scientific studies!

Time-saving!

Bleaching in one visit!

Lightening of teeth by 8-12 shades.

Most modern and most gentle whitening nowadays!

The long-term effect of up to 5 years!

Almost doesn’t harm the tooth tissue!

Contraindications of teeth whitening:

• Allergic reactions to components of bleaches
• Age lesser than 18 years
• Oncological diseases
• Pregnancy and lactation
• The presence of cavities and poor fillings (there is needed dental hygiene and dental treatment teeth before bleaching)
• Smoking and poor oral hygiene
• Tooth sensitivity, the presence of large cracks and erosion of enamel

Crowns and veneers by using CAD / CAM CEREC 3D technology

Every day Tourists from countries like Germany, Switzerland, Austria, Russia chose our clinic The main reasons are speed services, high-quality equipment and cost savings. CEREC system is getting easier our work. This technology was developed in one of the University in Zurich. Using this modern system, we can always meet the wishes of patients who want to make a crown or veneer during one visit.

With CEREC system is no need to create pointless impressions and plaster models. Doctor scans situation in the mouth thanks to special intraoral camera Cerec Omnicam and create a 3D model of teeth on a computer. This system also detects the three-dimensional display of ground teeth, neighboring teeth and their antagonists. Doctor sees on computer models of future restaurant teeth or bridges. The image is enlarged twelve times, which allows to increase the precision of design. After finishing the scaning, the computer calculates the volume of reconstruction and sends the evaluated data to a grinding block.

The final stage of production is automated, high-speed cutter is milling around the inlay / onlay or ceramic crowns with a precision of a hundredth of a millimeter. After just ten minutes is the crown ready.

The benefits of CEREC technology:

• Saving time: the whole process of making prosthetic work is done during one visit and it only takes 1,5 hours.
• Reliability: computer technology makes it possible to produce accurate designs that are firmly fixed on a pre-sanded and prepared teeth.
• Almost perfect contact between the teeth, which eliminates the risk of secondary caries.
• Structure of the inlay / onlay is closest to the similar structure of the tooth enamel.
• With CEREC technology, we can create a variety of designs: the crown, veneers, inlays / onlays and bridges.
• This technology can be applied to the teeth with different stage of damage (80%).
• Working with ceramic inlay / onlay is tougher than with any other ceramic restorations.
• On this surface it is also not adhered plaque and therefore there is no gum irritation.

CAD / CAM CEREC system is a device for aesthetic ceramic restorations, with the help of which we can make crowns, veneer and bridges during one visit.

The Clinic BioDent offers Zirconia implants
manufactured by the Swiss Company AXIS Biodental.

The package Crown + Implant consisting
of a one piece AXIS Monobloc implant placement
and manufacture of a full ceramic crown based
on CEREC technology costs 999 €
and takes one day only!

The number of people with various allergies, high sensitivity and weakened immune system continues to grow. This argument should not be taken light-heartedly and consideration should be given to an option of having Zirconia implants and fully ceramic crowns installed.

Patients with thin soft tissue biotype (predominantly, elderly people) often encounter a situation when implants become visible in the crown edge area. Since the Zirconia implant’s color is white and corresponds to the color of the bone, it becomes a perfect replica of the nature’s creation.

Ceramic implants do not impact the energy flow along the body meridians. And since they are nonreactive they represent a perfect solution for patients who follow the health care rules.

Ceramic implants are designed to withhold extremely high masticating pressures, at the same time replicating the best natural creations. Zirconia is durable, strong and stable, i.e. it has all the qualities of a first-class dental material.

Similar experimental studies performed by the Swiss AO Research Institute reconfirm the same outcome: ceramic implants demonstrate perfect retention.

Other numerous studies also prove that Zirconia is an ideal material for dental implants.